Discontinued - Carbon Monoxide Transmitter

TXCO-50

Carbon Monoxide Transmitter

^€924,07 TXCO-50

ZUR BESTELLTABELLE

0 to 50 ppm Range
Compact and Inexpensive
Long Operating Life
NEMA 4 (IP65) Enclosure
Loop Powered and Reverse Voltage Protected
Temperature Compensation
Applications:
CO from Air, Oxygen and Nitrogen Generators
Gas Manufacturers–Filling Stations
Heat Treating and Bright Annealing
Medical Breathing Devices

Umwelttechnik/Wetterstationen - Verwandte Produkte anzeigen

Beschreibung

This product has been discontinued.

TXCO-50 Series of carbon monoxide transmitters is a simple, accurate and very economical way to measure CO in the 0 to 50 ppm levels. For special ranges please consult Omega.

The TXCO-50 sensor uses a special electro chemical cell to measure the CO concentration. The sensor meets the industrial requirements for accuracy, sensitivity and ease of use.

The transmitter comes fully calibrated and requires no calibration for two years. After two years the TXCO-50 can be calibrated with a CO gas. Typical sensor life is up to 5000 ppm hrs.

Specifications
Measuring Range: 0 to 50 ppm CO
Special Ranges: Consult OMEGA
Calibration: Using a known CO calibration gas that is NIST traceable
Accuracy:
±2% FSD T = constant
±5% FSD 0>T>50°C (122°F)
Response Time: 90% FSD at 20°C (68°F) < 30 sec 90%
Operating Temperature: 0 to 50°C (32 to 122°F)
Warm Up Time: 2 minutes
Pressure: 0.1 to 1 bar
Signal Output: 4 to 20 mA/DC loop power
Voltage: 24 Vdc
Load: Type 470 Ω at 18 Vdc maximum 700 Ω
Housing: NEMA 4 (IP65)
Dimensions: 80 L x 75 W x 55 mm D (3.15 x 2.95 x 2.16")
Enclosure: Painted aluminum
Connection: ¼" tubing
Weight: 1.0 kg (2.2 lb)

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

TXCO-50

Consult Sales

Lieferzeit:

Loop powered carbon monoxide transmitter, fully calibrated

*Alle Preisangaben in Euro.
Anmerkung: Comes complete with operator’s manual.