Cookies auf den Omega Webseiten
Wir verwenden Cookies auf unserer Webseite. Diese Cookies sind für die ordnungsgemäße Funktion der Webseite unerlässlich. Wenn Sie fortfahren, ohne Ihre Einstellungen zu ändern, gehen wir davon aus, dass Sie alle Cookies auf dieser Webseite akzeptieren.Um weitere Informationen zu diesen Cookies zu erhalten, klicken Sie bitte hier.
SCHLIESSEN
Einkaufswagen  |  Kontakt  | 
Deutschland 07056-9398-0
Internationale Rufnummer++49 (0) 7056-9398-0
Layer N Banner

Current to Pressure (I/P) Converter

IP210A

Current to Pressure (I/P) Converter - Order online | IP210A

Current to Pressure (I/P) Converter - Order online

2 year warranty CE
  • Loop Power
  • Ideal for Pneumatic Control Systems
  • IP65 Sealed Case
  • Zero and Span Adjustments for Field Calibration
  • Rugged Zinc Cast Housing
  • Check our low cost IP211 I/P converter here
Ventile, Regler und I/P-Konverter - Verwandte Produkte anzeigen

Beschreibung

A "current to pressure" converter (I/P) converts an analog signal (4-20 mA) to a proportional linear pneumatic output (3-15 psig). Its purpose is to translate the analog output from a control system into a precise, repeatable pressure value to control pneumatic actuators/operators, pneumatic valves, dampers, vanes, etc. The IP210 is a loop powered instrument, which eliminates the need for an external power supply.

SPECIFICATIONS
Accuracy: IP210A 1.5 and 2.3% (see spec sheet)
Supply Sensitivity: +/-0.15% span per 1.5psig and +/-0.004% span per 1.0psig (see spec sheet).
Zero Adjustment: 5% FS
Span Adjustment: 20% FS
Operating Temp.: -29 to 60 °C (-20 to 140°F)
Input Resistance: <300 Ohms
Media: Oil free clean dry air filtered to 25 µm
Max. Supply Pressure: 100 psi and 150 psi (see spec sheet).
Min. Supply Pressure: 3 or 5 psi above maximum output pressure (see spec sheet).
Air Consumption (leakage): 0.1 SCFM or 0.07 SCFM (see spec sheet).
Flow Rate: 12 SCFM for 2-60 psi ; 24 SCFM > 60 psi
Response Time: Less than 0.5 seconds (10 to 90%step)
Failure Mode: Upon electrical failure, the signal pressure falls to bleed pressure.
Pressure Port: 1 /4 " NPTF
Electrical Conn.: DIN 43650 with screw terminals included
Housing: IP65 rated, Epoxy painted zinc die castings
Construction: Nitrile diaphragms, SS/nylon flapper, nozzle, and supply valve. Integral surface mounting bracket included.
Weight:3 lb (1.7 kg)
*Alle Preisangaben in Euro.
Anmerkung: All other models are 2 wire loop powered models.
We noticed you are from the US. Visit your local site for regional offers and live support.