Low Cost Half-Bridge Load Cells for Tension/Compression Applications
Discontinued Product!

LCLB - Discontinued

Full Parallelogram Design to Minimize Off-Center Load Effects and Improve Accuracy
Small Size
Half Bridge Design to Reduce the Number of Interconnecting Wires
Bonded Foil Strain Gage Design for High Reliability

Beschreibung

The LCLB Series has been discontinued, please see the LCAE Series as a possible substitute or consult OMEGA's Pressure Engineering department.

SPECIFICATIONS
Excitation: 10 Vdc recommended; 15 Vdc maximum
Full Scale Output: 1 and 2 lb ranges: 1 mV/V ±0.25 mV 5 to 20 lb ranges: 1 mV/V ±0.15 mV
Bridge Configuration: Active half bridge, adjacent arms
Linearity: 0.15% FS
Hysteresis: 0.15% FS
Repeatability: 0.05% FS
Creep: 0.01% Load 5 min
Thermal Effects: Zero 0.003% FS/°F Span 0.035% FS/°F
Zero Balance: 1.0% FS
Insulation Resistance: 1000 MOhms at 50 Vdc
Operating Temp Range: -140 to 66°C (-40 to 151°F)
Compensated Temp Range: -10 to 46°C (15 to 115°F)
Safe Overload: 150% of rated capacity
Maximum Overload: 200% of rated capacity
Eccentric Load Effect: ±1% FS Center Load; 3" Eccentricity North/South 1 /4 " East/West, ±1% FS
Gage Resistance: 500 ±50 Ohms
Deflection: 1 lb: 0.017", 2 lb: 0.11", 5 lb: 0.13", 10 lb: 0.12", 20 lb: 0.14"
Recommended Platform Size: 1 & 2 lb: 6 x 4", 5 to 20 lb: 6 x 6"
Electrical: 18" (0.4 m) 3-Conductor Flat Cable

*Alle Preisangaben in Euro.
Anmerkung: Two user supplied 500 Ohm bridge competion resistors are required.

Low Cost Half-Bridge Load Cells for Tension/Compression Applications Discontinued Product!

LCLB - Discontinued

Low Cost Half-Bridge Load Cells for Tension/Compression Applications
Discontinued Product!